Hotline: 0086-752-7839-002

TITAN DC2 HD Whoop - BNF

$329.99

$339.00

Features:Less than 250grams included 4S 450mAh batteryNo Props or frame in view!Low Resonance frame construction (Less Jello, more Cinematic)DJI FPV Air Unit 720p 120fps FPV feed (record in 1080p/60fp..

  • Price in reward points: 339
  • Brands iFlight
  • Product Code: TITAN DC2
  • Availability: In Stock

Available Options

Tags: TITAN DC2 Micro HD Drone BNF

Features:

  • Less than 250grams included 4S 450mAh battery
  • No Props or frame in view!
  • Low Resonance frame construction (Less Jello, more Cinematic)
  • DJI FPV Air Unit 720p 120fps FPV feed (record in 1080p/60fps)
  • Butter smooth XING1404 4S
  • Duct prop guards to protect the sensitive environment or yourself
  • Pre-tuned with smooth freestyle settings

TITAN DC2 BNF Specs:

  • SucceX-A F4/40A BLHeli_32 true AIO board
  • Motor: XING NANO 1404 4600KV
  • Wheelbase: 122mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 25mm (aluminum column height 25mm)
  • Ducted propeller size: 2.3 inch
  • Maximum propeller size without ducts: 2.5 inch (or 65mm props)
  • FC pattern: 20*20mm,30.5*30.5mm
  • FPV cam spacing: 19mm
  • Weight: 165g (without battery)
  • Flight time: 5-6 min cruising

TITAN DC2 HD Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x TITAN DC2 HD Frame
  • 1x DJI Digital HD FPV Air Unit (FPV Camera + Air Unit Module)
  • 1x TPU Bracket for DJI Air Unit Module
  • 1x TPU Antenna holder for DJI antenna
  • 2x TPU camera side plate soft mount
  • 2x 2327-3 / HQ 65mm-3 (Set of 4 - Color May Vary)
  • 1x iFlight Lipo Strap 

FC // SucceX-A F4 AIO

  • MCU: 168MHz STM32F405
  • Gyro:MPU6000
  • Blackbox:8MB
  • OSD Chip: NO (Analog OSD not available)
  • OSD Betaflight: YES (Digital DJI Air Unit pass-through)
  • BEC: 5V 2.5A  (3A MAX) / 10V 2.5A (3A MAX)
  • Voltage sensor scale: 110
  • Current sensor scale: 100
  • Inverter for SBUS input (UART2-RX)
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 4
  • 8 pin for DJI air unit port (10V,GND,T1,R1,GND,R2I,T2,5V)
  • BLHeli32 Telemetry:RX4
  • Input voltage:recommended 2-6S
  • Firmware: IFF4_AIO(IFRC)
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions:   40.5*43mm
  • Weight: 11.4g
  • USB type-C

ESC // SucceX 40A 2-6S

Top Features:

- 6 layers double-sided PCB board

- 2oz 1.6mm thick power board

- 32bit STM32F051 MCU, 48kHz maximum clock speed

- TDK MLCC Low ESR ceramic capacitors

- Top grade TPN2R304PL MOSFET

Specification:

  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 484uF
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 40A / Burst: 50A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot 
  • Target: iFlight-BL32-4IN1
  • Mounting pattern: 30.5*30.5mm/Φ3mm
  • Dimensions43*39mm (including the power pads)

Additional Suggested Parts(NOT included in package)

  • DJI HD FPV Goggles
  • Radio Controller
  • DJI Remote Controller (Mode 2)
  • Battery light 4S 450mAh (indoor)
  • Battery 4S 650mAh (outdoor)


Write a review

Note: HTML is not translated!
    Bad           Good