Hotline: 0086-752-7839-002

SucceX-D F7 TwinG Stack (F7+50A ESC) + DJI Air Unit Bundle

$259.00

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation shoul..

  • Price in reward points: 259
  • Brands iFlight
  • Product Code: FC07271
  • Availability: In Stock

The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Micro USB which makes the connection easily.

Features

• Universal USB Type C connector instead of micro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.

SucceX-D F7 TwinG  SPECS:

- MCU:216MHz STM32F722RET6

- Gyro: 2x ICM20689

- Baro:YES

- Betaflight OSD:YES

- Blackbox: 32MB

- 5 x Uarts

- 8 x Motor outputs

- 8 pin 4in1 ESC port

- 4-pin VTX connector

- Betaflight Firmware:betaflight_4.0.5_STM32F7X2.hex

- CLI config:IFLIGHTF7_TWIN_G.config

Physical 

- Mounting hole:30.5*30.5mm,φ4mm with Grommets φ3mm 

- Size:36*36mm 

- Weight:7.5g 

SucceX 50A 2-6S 4-in-1 ESC Dshot1200

Features:

- 8 layers double-sided PCB board;

- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;

- 32bit FO51K86 MCU, 48mHz maximum clock speed;

- TDK MLCC Low ESR ceramic capacitors;

- Top grade NTMFS5C430NL MOSFET;

- Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

Specification:

- Dimension: 43*39mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight:14.4g

- Volts input: 2-6S

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

-Telemetry:Supported

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4IN1

- BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

DJI Digital HD FPV Air Unit

Digital HD systems have traditionally been rather bulky and unwieldy to mount on a mini quad. Not anymore. With this air unit, you can comfortably fit the module in your mini quad stack (probably not slammed frames). The 'mini' camera fits easily into your existing builds, no weird mounting adapters.

Note: The air unit module does get very hot in use. Do not power on for an extended period of time without proper cooling.

Important


The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.


Specifications

Weight:Air Unit (Camera included): 45.8 g,3.9 g (MMCX elbow each)

Dimensions

*Air Unit: 44 × 37.8 × 14.4 mm

*Camera: 27.4 × 21.1 × 20.1 mm

*Coaxial Cable: 100 mm

*Operating Frequency: 5.725-5.850 GHz

*Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm

*Min. Latency (end-to-end)

*Low Latency Mode (720p/120fps): <28 ms

*High-Quality Mode (720p/60fps): <40 ms

*Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km

*Video Format: MP4 (Video format: H.264; Audio format: ACC-LC)

*I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot

*Operating Temperature Range: 32° to 104°F (0° to 40°C)

*Input Power: 7.4-17.6 V, about 4-9 W

*Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M

*Lens: 2.1 mm, f/2.1

*Shutter: Rolling shutter

*ISO: 100-25600

*FOV: 150°(D); 122°(H); 93°(V)

*Dimension: 22.1 × 21.1 × 20.1 mm

*Weight: 8.2 g

*Channels: 8

*Channels Info

FCC

Channel 1: 5660

-Channel 2: 5695

-Channel 3: 5735

-Channel 4: 5770

-Channel 5: 5805

-Channel 6: 5878

-Channel 7: 5914

-Channel 8: 5839

Compatibility

DJI FPV Goggles

DJI FPV Remote Controller

Tips

*The air unit may become hot during or after the operation.

*DO NOT touch the air unit before it cools down.

*DO NOT use the air unit for an extended period when there is no external cooling equipment. Otherwise, the air unit may overheat and enter overheat protection mode. 

*Keep the antennas of the air unit at least 40 mm apart.

*Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.

Package Includes

- SucceX-D F7 TwinG Flight Controller (HD Version)

- SucceX 50A 4-in-1 ESC  * 1pc

- DJI FPV Air Unit (with a camera and four M2 screws) × 1

- Three-in-one cable × 1

- Antenna (MMCX elbow) × 2

Write a review

Note: HTML is not translated!
    Bad           Good