Hotline: 0086-752-7839-002

iFlight SucceX F7 V2.1 TwinG FC w/Baro + SucceX 60A V2 Plus BLHeli_32 4-in-1 ESC

$112.99

SucceX F7 V2.1 TwinG FC w/BaroSpecification:- MCU:216MHz STM32F722RET6- Gyro: 2x ICM20689(SPI)- Baro:Yes- OSD:AT7456E- Blackbox: Onboard, 32MB- 5x Uarts- 8x Motor outputs- 8-pin 4in1 ESC port- 4-pin V..

  • Price in reward points: 113
  • Brands iFlight
  • Product Code: FC07015
  • Availability: In Stock

SucceX F7 V2.1 TwinG FC w/Baro

Specification:

- MCU:216MHz STM32F722RET6

- Gyro: 2x ICM20689(SPI)

- Baro:Yes

- OSD:AT7456E

- Blackbox: Onboard, 32MB

- 5x Uarts

- 8x Motor outputs

- 8-pin 4in1 ESC port

- 4-pin VTX connector

FC Firmware 

- Betaflight

- Target:EXF722DUAL

Physical 

- Mounting hole:30.5*30.5mm,φ4mm with Grommets φ3mm 

-Size:36*36mm 

-Weight:6.2g 

Features:

- 8 layers single-board stacking PCB board;

- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;

- 32bit FO51K86 MCU,48mHz running speed;

- TDK MLCC Low ESR ceramic capacitors;

- Top grade metal MOSFET;

- Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.

Specification:

- Dimension:43x39mm

- Mounting Holes: 30.5*30.5mm/Φ4mm

- Weight: 13.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4 in 1

RECOMMENDATION:

- No additional capacitor needed up to 5S!

- But to encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!

Package Included:

SucceX F7 V2.1 TwinG Flight Controller w/ Barometer x 1pc

SucceX 60A V2 4-in-1 ESC x 1pc

Write a review

Note: HTML is not translated!
    Bad           Good