Channel: 7Channel output
Dimensions (W x Lx H):21.5*15mm
Weight: 0.9g （without shells ）
Antenna Length Main RX:13.5cm(2)
Remote Control Range:500M(tested with JR DSX9)
ServoSync (feature does not work with module systems)
Preset failsafe system
Compatibility (Spectrum and JR DSM2/DSMX): DX6I,DX7,DX8,DSX7,DSX9DSX11
I. Press the binding button and connect power to the receiver. the Transmitter in Bind model. LED quick flash, binding completed LED will off. Reconnect power to receiver LED keep lit, now the receiver is ready to fly.
II. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of the transmitter (LED will illuminate), Turn on the transmitter.
III. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind has accomplished the LED of the receiver will illuminate solid. Failsafe should be programmed correctly。
IV. Restart the receiver by cycling its power off and turn on and connect battery into BIND channel is recommended. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.
Notes:Only onetimebind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed.
Pack List :
R601X Receiver*1 pc